Новости

llianz Capital Partners orders 16 V126-3.3 MW turbines for first project in Sweden to use the new Vestas turbine

Vestas has received a firm and unconditional order for 16 V126-3.3 MW turbines for a wind power project in Sweden. The order was placed by Allianz Capital Partners, the Allianz Group's in-house investment division for alternative investments. With a combined generation capacity of more than 1,000 MW, Allianz is one of the world's largest financial investors in renewable and wind energy.

The wind power plant is one of the largest in the southern part of Sweden and will be installed in Sättravallen, east of Kristinehamn. This will be the first project in Sweden to utilise the Vestas V126-3.3 MW turbine. Turbine delivery is planned to begin in the third quarter of 2015 with commissioning expected completed in the fourth quarter of 2015.

The contract includes supply, installation and commissioning of the 16 V126-3.3 MW turbines, along with a VestasOnline® Business SCADA solution and a 15-year full-scope service agreement (AOM 5000).

02/07/2014
Elemental Energy renews service contract for Fermeuse wind power plant in Newfoundland, a 27 MW site utilising Vestas V90-3.0 MW turbines.

Vestas has signed an agreement with Elemental Energy for a 10-year AOM 4000 service agreement renewal that covers the 27 MW Fermeuse wind power plant in Newfoundland, Canada. The project features nine V90-3.0 MW turbines and was commissioned in 2009. Vestas has conducted service on the site since installation.

AOM (Active Output Management) 4000 is an energy-based availability guarantee that ensures the turbines are operational when the wind is blowing. This service option includes the VestasOnline® surveillance system that remotely controls and monitors the turbines and minimizes lost production by predicting when maintenance may be required.

 

17/06/2014
TGC-1 (Gaspromenergoholding) will accomplish complex upgrading of Unit № 1 of Tsentralnaya power station in Saint-Petersburg.

Under the project two Siemens SGT-800 gas turbines plants each rated at 50 MW will be installed on the site. The station will operate in cogeneration cycle. Total electric output of the station will be of 100 MW. General designer of the station is Teploelectroproject Institute JSC, general contractor is UK OPEK JSC. The customer and investor of the station is Mezhregionstroy Ltd. It is planned to finish the project of upgrading of Unit № 1 of Tsentralnaya power station in 2015. The Siemens SGT-800 industrial gas turbine combines a reliable robust design with high efficiency and low emission levels.

Turbines and Diesels       

16/06/2014
The construction of Novo-Bereznikovskaya power station in Permsky Area.

The station will be constructed and commissioned by KES-Holding JSC. It will consist of two General Electric MS6001FA gas turbine power plants each rated at 77 MW and two UTZ steam turbines. Total electric output of combined cycle cogeneration power station will be 230 MW. Commissioning of Novo-Bereznikovskaya power station is planned at the end of 2015. The cost of the project is 10 bln rubles. At present practically all main power equipment was delivered to the site. Modular transformers were developed and supplied to the station by Toghliatti transformers Ltd.

Turbines and Diesels       

15/06/2014
Gas turbines power station was constructed on the site of Krymsky alkali-works.

Cogeneration power station was developed on the base of Siemens SGT-400 gas turbine plant and Viessmann waste-heat boiler. Electric output of the station is 14.4 MW. All generated power will be used for technological needs of the enterprise. The station is equipped with Energas fuel gas treatment system. It consists of GS-FME-1700/3 gas treatment system and Enerproject EGSI-S-180/800WA booster compressor station. The project was developed by DneprVNIPIenergoprom Institute. After commissioning of cogeneration power station its annual electric power generation will be 126 000 MWh, thermal power – 177300 Gcal. The enterprise plans to cover the expenses during four years.

Turbines and Diesels       

14/06/2014
New boiler-house on biomass was commissioned in Latvia.

Liepajas energija boiler-house and CHP plant commissioning gave the opportunity to reduce electricity tariff by 22% and to increase enterprise efficiency by 28%. New boiler-house is equipped with two modern hot-water boilers each rated at 15 MW. They use wood chips as the fuel. CHP plant was commissioned in 2012. It is equipped with Turboden 22 CHP (Rankin Cycle) with electric output of 2320 kW. Generated thermal power is used in central heating system of the city, electric power is transferred to national power grid. The station was developed by UPB. Main power equipment was supplied by Turboden (Italy) and Kohlbach (Austria).

Turbines and Diesels       

13/06/2014
Autonomous power station was commissioned on the site of Myasnitsky Ryad meat-processing factory in Odintsovo (Moscow Region).

The project was realized by Rolt power systems under the turn-key contract. ROLT PSG 1200 container power station was developed on the base of Caterpillar G3512E gas engine. Electric output of the station is 1.2 kW, thermal output is 1.35 kW. Electric efficiency of the station is 41.7%. Engine waste heat is utilized with the help of Aprovis waste-heat boiler and Alfa Laval plate heat-exchanger. Station control system was developed on the base of ComAp controllers. The commissioning of the station will give the opportunity to reduce the cost for power supply. In future the company plans to generate necessary electric and thermal power by means of own power station.

 

Turbines and Diesels       

11/06/2014