Новости

KMPO JSC commissioned gas pumping units on the site of booster CS of Urengoyskoye field.

The customer of the project is Gasprom dobycha Urengoy Ltd. The project was developed by VNIPIgasdobycha Institute. Gas pumping units were developed on the base of NK-16-18ST gas turbine drives and 324GTs2-380/53-57М1 centrifugal compressors delivered by Sumy NPO named after Frunze.

Turbines and Diesels       

09/03/2015
ROTEK JSC will carry out the reconstruction of 9th unit on the site of TETs-22 of Mosenergo.

Under the contract Ural Turbines Plant will carry out complete set of works for the replacement of main and auxiliary equipment of the unit till the 1st of September, 2018. New advanced Т-295/335-23.5 steam turbine will be installed on the site. Four-cylinder Т-295/335-23.5 steam turbine will be specially manufactured for this project. It is the most powerful turbine of ROTEK.

Turbines and Diesels       

03/03/2015
Siemens provides 157 wind turbines for three projects in South Africa.

Siemens has secured another large wind power contract in South Africa with an order for 157 wind turbines for three projects in the South Africa province of Northern Cape. The 2.3 megawatt (MW) machines of the Siemens G2 platform will be installed at the wind power plants Khobab, Loeriesfontein 2 and Noupoort. The customer is a consortium led by Mainstream Renewable Power. The contract includes a service and maintenance agreement for a period of 10 years.

The three wind power plants have a combined generation capacity of 360 MW. The 140 MW Khobab wind farm and the 140 MW Loeriesfontein 2 wind farm, are both located in the Namakwa District Municipality, and the 80 MW Noupoort wind farm is located in Umsobomvu Local Municipality, 400 kilometers north of Port Elizabeth. All projects will be equipped with the Siemens SWT-2.3-108 wind turbine with a rotor diameter of 108 meters and towers with a hub height of 99.5 meters. Turbine installation will start in August 2015. Commissioning of the three projects is scheduled from early 2016 to the end of 2017.

27/02/2015
Trigeneration power station was built on the site of microwave electronics plant in Tomsk.

Total electric output of the station is 1.7 MW, thermal output is 9 MW and cooling power is 1.7 MW. The station was developed on the base of two Caterpillar G3412C plants each rated at 360 kW and two Caterpillar G3508 gas engine power plants each rated at 505 kW. The station is equipped with Prodex KM-450 and KM-750 waste-heat boilers, Viessmann Vitoplex 100 hot water boilers and Thermax Inc ProChill 5G 4L absorption chillers. The customer of the station is Micran NPF.

Turbines and Diesels       

26/02/2015
OX2 orders 10 V126-3.3 MW turbines for a wind power plant in northern Sweden.

Vestas has received a firm and unconditional order for 10 V126-3.3 MW turbines for the Maevaara 2 wind power plant. The order also includes the first Vestas De-icing System for the V126-3.3 MW.

The order was placed by Nordic renewable energy developer OX2. The wind power plant will be in northern Sweden. This project is the second in Sweden to utilise the V126-3.3 MW turbine model. Turbine delivery is planned to begin in the second quarter of 2016 with installation during second and third quarter of 2016.

The contract includes supply, installation and commissioning of 10 V126-3.3 MW turbines, along with a VestasOnline® Business SCADA solution and a 15-year full-scope service agreement (AOM 5000).

24/02/2015
CHP station was commissioned on the site of Nizhegorodsky University named after Lobachevsky.

The station consists of two МТU АоЕ 12У 40001ЗЗР gas engine plants each rated at 1156 kW. Total electric output of the station is 2.2 MW, thermal output is 2.4 MW. The station operates on the base mode in parallel with the main power grid. The project was realized by Energonezavisimost Ltd. under turn-key contract.

Turbines and Diesels       

23/02/2015
Power supply system of Belautozapchast JSC is under reconstruction in Zhodino (Buelorussia).

CHP station is installed in separate building. It was developed on the base of Capstone C1000 microturbine power plant rated at 1 MW. It is equipped with KUV-1300 hot water boiler with thermal output of 1300 kW manufactured by GSKB JSC. Modular power plant will operate on base mode in cogeneration cycle in parallel with the main power grid. The project of the station was developed by Eneka JSC. Main power equipment was supplied by BPC Engineering Ltd. The station is equipped with special unit for cycle water treatment for water circuit.

Turbines and Diesels       

16/02/2015