Новости
Combined cycle power plant was designed as single-shaft unit. It consists of Siemens SGT5-4000F gas turbine plant nominally rated at 290 MW, Еp-264/297/43-13,0/3,0/0,47-558/558/237-11,6bb horizontal three-circuit drum heat-recovery steam generator supplied by EmAlliance and SST5-5000 two-cylinder steam turbine with intermediate superheating and steam extraction.
The GTCC project, which is being financed by the World Bank, calls for the refurbishing and modernization of the existing Gomel combined heat and power plant located in the city of Gomel. H-25 gas turbine with a power output of 26 MW was supplied by Mitsubishi Hitachi Power Systems under the order from China Machinery Engineering Corporation (CMEC), the company responsible for EPC of a cogeneration gas turbine combined cycle power plant project Besides the H-25 gas turbine, the GTCC plant will incorporate a steam turbine, waste heat recovery boiler, generator and auxiliary equipment.
The plants are intended for compression and injection of associated petroleum gas into formation. Twelve plants developed on the base of Ariel KBU/6 opposed reciprocating compressors with the drive from Caterpillar G3616LE engines each rated at 3.5 MW. Gas pressure at inlet of gas compressor station is 0.6 MPa, outlet pressure is 28 MPa. Volumetric capacity of each compressor is 23,060 m3/h. The customer of the project is East-Siberian oil & gas company.
Each compressor plant is installed in separate ready-to-operate module. Air cooler units and interstage separators are arranged on the special site. The commissioning of compressor station is planned this year. The main difficulty of the project is the content of associated petroleum gas. The gas contains great volume of hydrogen sulphide and it is necessary to use special technical and technological equipment for gas treatment.

|
Power station consists of two power units on the base of Siemens SGT-800 gas turbine power plants with waste-heat boilers. The purification and compression of fuel gas is provided by gas conditioning unit, manufactured by Enerproject.
|

|
Power station was constructed on the site of Rosinka industrial-warehouse complex which is situated in Durykino village, Moscow Region. The station consists of four GE Jenbacher JGC 316 GS-N.LC container gas engine power plants. Total electric output of the station is 3.32 MW. The project was realized by Max Motors JSC. It carried out design works, supplied main power equipment of the station, fulfilled assembling and commissioning works. Under the contract the specialists of the company will maintain supplied equipment during operation.
|
The station will be constructed by Zvezda-Energetika JSC on the site of high technology enterprise for the production of confectionery products which is affiliate of KDV-Group. Total electric output of the station will be 12.8 MW, thermal output – 8.9 MW. The station will consist of six MTU 20V4000L33 gas engine power plants each rated at 2,140 kW. The equipment will be installed in easily build modular construction. The station is equipped with six waste-heat boilers. All generated electric and thermal power will be used for technological needs of the enterprise. Zvezda-Energetika will construct the station under turn-key contract. It will be general designer and general contractor of the project. The company will supply all power equipment of the station, will carry out all assembling, civil and commissioning works. After commissioning the station will be connected to power grid of MRSK Center-Voronezhenergo PJSC.
They were delivered to the site under the order of Gasprom dobycha Noyabrsk Ltd. Total electric output of the station is 72 MW, thermal output – 80.4 MW. It will operate in cogeneration cycle. The station wil consist of six EGES-12S Ural power plants developed by Iskra NPO and manufactured by Iskra-Energetika JSC. EGES-12S Ural power plant was designed around GTU-12P developed by Aviadvigatel JSC and manufactured by Perm Motor Plant and TS-12 electric generators supplied by Privod JSC.
|